{"id":36,"date":"2020-11-25T17:58:31","date_gmt":"2020-11-25T17:58:31","guid":{"rendered":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/?page_id=36"},"modified":"2026-03-16T15:13:53","modified_gmt":"2026-03-16T22:13:53","slug":"publications","status":"publish","type":"page","link":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/publications\/","title":{"rendered":"Publications"},"content":{"rendered":"<h3>Journal Articles, Books, and Manuals<\/h3>\n<h5>2026<\/h5>\n<ul>\n<li>Dash, S., Belvi, A., Chatterjee, A., and <strong>Kanvinde, A.M.,<\/strong> (2026 &#8211; in press). &#8220;Internal force distribution in column base connections with an attached brace,&#8221; Journal of Constructional Steel Research, Elsevier.<\/li>\n<li>Jhunjhunwala, A., and <strong>Kanvinde, A.M.,<\/strong> (2026 &#8211; in press). &#8220;Probabilistic Fracture Assessment in Partial-Joint Penetration Welded Pull Plate Experiments representing Pre-Northridge Column Splice Details,&#8221; Journal of Structural Engineering, American Society of Civil Engineers.<\/li>\n<li>Tu, M., Morrison, M.L., Jhunjhunwala, A., <strong>Kanvinde, A.M.,<\/strong> (2026 &#8211; in press). &#8220;Characterizing Spatial Distributions of Microstructure and Notch Toughness in Modern Structural Steel Weldments Using Numerical and Physical Simulations,&#8221; Journal of Materials in Civil Engineering, American Society of Civil Engineers.<\/li>\n<li><strong>Kanvinde, A.M.,<\/strong> (2026 &#8211; in press). &#8220;Column base connections: Research, Design, and a look to the future,&#8221; Engineering Journal, American Institute of Steel Construction.<\/li>\n<\/ul>\n<h5>2025<\/h5>\n<ul>\n<li>Maity, A., <strong>Kanvinde, A.M.<\/strong>, Heredia Rosa, D., de Castro e Sousa, A., and Lignos, D., (2025). &#8220;A torsional fiber element and a multiaxial softening model to simulate cyclic interactive buckling in wide-flanged steel members,&#8221; Computers and Structures, Elsevier. https:\/\/doi.org\/10.1016\/j.compstruc.2025.107970<\/li>\n<li>Heredia Rosa, D., de Castro e Sousa, A., Lignos, D., Maity, A., and <strong>Kanvinde, A.M.<\/strong>, (2025). &#8220;A Force-Based Beam-Column Element with Selective Gradient-Inelasticity for Softening Materials in 3-Dimensional Nonlinear Analysis,&#8221; Earthquake Engineering and Structural Dynamics, Wiley. https:\/\/doi.org\/10.1002\/eqe.70065<\/li>\n<li>Jhunjhunwala A., and <strong>Kanvinde, A.M.,<\/strong> (2025). \u201cThe effect of Column Base Fixity on the Compressive Strength of Axially Loaded Steel Columns,\u201d Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-14978<\/li>\n<li>Maity, A., <strong>Kanvinde, A.M.,<\/strong> Heredia Rosa, D., de Castro e Sousa, A., Lignos, D., (2025). &#8220;Simulating interactive buckling in steel members using a Torsional Fiber Element integrated with a Multiaxial Local Buckling constitutive model,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-14023<\/li>\n<li>Heredia Rosa, D., de Castro e Sousa, A., Lignos, D., Maity, A., and <strong>Kanvinde, A.M<\/strong>., (2025). &#8220;A multiaxial plasticity model with softening for simulating inelastic cyclic local buckling in steel beam-columns using fiber elements,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-14262<\/li>\n<li>Zhu, Y., Hassan, A.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Fascetti, A. (2025). &#8220;Multiscale Lattice Discrete Particle Modeling of Steel-Concrete Composite Column Bases under Pull-Out and Cyclic Loading Conditions ,&#8221; Computers and Structures, Elsevier. https:\/\/doi.org\/10.1016\/j.compstruc.2025.107705<\/li>\n<\/ul>\n<h5>2024<\/h5>\n<ul>\n<li>Falborski, T., Murtas, G., Elkady, A., Lignos, D., and <strong>Kanvinde, A.M.<\/strong>, (2024). &#8220;Evaluation of overstrength-based interaction checks for columns in steel moment frames,&#8221; Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2024.109123<\/li>\n<li>Jhunjhunwala, A., Maity, A., <strong>Kanvinde, A.M.<\/strong>, (2024). &#8220;Simulating column splice fracture and post-fracture response for seismic assessment of steel moment frames,&#8221; Earthquake Engineering and Structural Dynamics, Wiley. https:\/\/doi.org\/10.1016\/j.jcsr.2017.06.013<\/li>\n<li>Villar-Salinas, S., <strong>Kanvinde, A.M.<\/strong>, and Lopez-Almansa, F., (2024). &#8220;Estimation of backbone model parameters for simulation of exposed column base plates,&#8221; Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2024.109034<\/li>\n<li>Heredia Rosa, D., de Castro e Sousa, A., Lignos, D., Maity, A., and <strong>Kanvinde, A.M.<\/strong>, (2024). &#8220;A multiaxial plasticity model with softening for simulating inelastic local buckling in steel beam-columns under monotonic loading through fiber elements,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-13136<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, Maamouri, M., Buckholt, J., (2024). &#8220;<a href=\"https:\/\/www.aisc.org\/Design-Guide-01-Base-Connection-Design-for-Steel-Structures-Third-Edition\">Design Guide 1: Base Connection Design for Steel Structures (Third Edition)<\/a>,&#8221; American Institute of Steel Construction, Chicago, IL.<\/li>\n<li>Yasumoto, H., <strong>Kanvinde, A.M<\/strong>., Uang, C-M., and Garai, R., (2024). &#8220;Simulation based fracture assessment of seismic moment frame connections with box columns,&#8221; Journal of Structural Engineering, ASCE. https:\/\/doi.org\/10.1061\/JSENDH.STENG-13042<\/li>\n<li>Hassan, A.S., Maity, A., <strong>Kanvinde, A.M.<\/strong> and Richards, P.W., (2024). &#8220;Seismic response of blockout column base plate connections under axial compression and flexure,&#8221; Journal of Structural Engineering, ASCE. https:\/\/doi.org\/10.1061\/JSENDH.STENG-12349<\/li>\n<\/ul>\n<h5>2023<\/h5>\n<ul>\n<li>Ziccarelli, A.,\u00a0<strong>Kanvinde, A,M.,<\/strong>\u00a0and Deierlein, G.G., (2023). \u201cCalibrating an Adaptive Cohesive Zone Model to Simulate Ductile Crack Propagation in Structural Steel Under Cyclic Loading,\u201d Fracture and Fatigue of Engineering Materials and Structures, Wiley. DOI: 10.1111\/ffe.14183<\/li>\n<li>Hassan, A., and <strong>Kanvinde, A.M.<\/strong>, (2023). &#8220;Seismic Performance of Embedded Column Base Connections with Attached Reinforcement: Tests and Strength Models,&#8221; Engineering Journal, American Institute of Steel Construction, 60(4), 225-244.<\/li>\n<li>Song, B., Hassan, A., <strong>Kanvinde, A.M.<\/strong>, and Galasso, C., (2023). &#8220;Probabilistic seismic performance assessment of steel moment-resisting frames considering exposed column-base plate connections with ductile anchor rods,&#8221; Earthquake Engineering and Structural Dynamics, Wiley. https:\/\/doi.org\/10.1002\/eqe.3949<\/li>\n<li>Jhunjhunwala, A., and <strong>Kanvinde, A.M.,<\/strong> (2023). &#8220;Fracture Mechanics based fragility assessment of pre-Northridge welded column splices,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-11749<\/li>\n<li>Maity, A., <strong>Kanvinde, A.M.,<\/strong> Heredia Rosa, D.I., de Castro e Sousa, A., and Lignos, D.G., (2023). &#8220;A displacement based fiber element for simulating interactive lateral torsional and local buckling in steel members,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. https:\/\/doi.org\/10.1061\/JSENDH.STENG-11889<\/li>\n<li>Ziccarelli, A., <strong>Kanvinde, A.M.,<\/strong> and Deierlein, G.G., (2023). &#8220;Cyclic Adaptive Cohesive Zone Model to Simulate Ductile Crack Propagation in Steel Structures Due to Ultra-Low Cycle Fatigue,&#8221; Fracture and Fatigue of Engineering Materials and Structures, Wiley. https:\/\/doi.org\/10.1111\/ffe.13964<\/li>\n<\/ul>\n<h5>2022<\/h5>\n<ul>\n<li>Yao, Z., Wang, W., and <strong>Kanvinde, A.M<\/strong>., (2022). &#8220;A constitutive model of cyclic plasticity with Lode dependence for structural steels,&#8221; Computers and Structures, Elsevier. https:\/\/doi.org\/10.1016\/j.compstruc.2022.106826<\/li>\n<li>Falborski, T., and <strong>Kanvinde, A.M.,<\/strong> (2022). &#8220;Estimation of nonstructural stiffness in instrumented steel frames,&#8221; Engineering Structures, Elsevier. https:\/\/doi.org\/10.1016\/j.engstruct.2022.113947<\/li>\n<li>Hassan, A., Song, B., Galasso, C., and <strong>Kanvinde, A.M.<\/strong>, (2022). &#8220;Seismic Performance of Exposed Column Base Plate Connections with Ductile Anchor Rods,&#8221; Journal of Structural Engineering, American Society of Civil Engineers. 10.1061\/(ASCE)ST.1943-541X.0003298<\/li>\n<\/ul>\n<h5>2021<\/h5>\n<ul>\n<li>Pericoli, V., Lao, X., Ziccarelli, A., <strong>Kanvinde, A.M<\/strong>., and Deierlein, G.G., (2021). &#8220;Integration of an adaptive cohesive zone and continuum ductile fracture model to simulate crack propagation in steel structures,&#8221; Engineering Fracture Mechanics, Elsevier. https:\/\/doi.org\/10.1016\/j.engfracmech.2021.108041<\/li>\n<li>Zhu, Y., Fell, B.V., and <strong>Kanvinde, A.M.,<\/strong> (2021). \u201cContinuum Damage Mechanics based Ductile Fracture Fatigue Prediction in Buckling Steel Braces,\u201d Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2021.106812<\/li>\n<li>Singh, P.R., <strong>Kanvinde, A.M.<\/strong>, and Narasimhan, S., (2021). \u201cAssessing the fracture risk of corroded cast iron pipes in expansive soils,\u201d Journal of Pipeline Systems \u2013 Engineering and Practice, American Society of Civil Engineers, 12(4), https:\/\/doi.org\/10.1061\/(ASCE)PS.1949-1204.0000582<\/li>\n<li>Smith, C., Ziccarelli, A., Terashima, M.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Deierlein, G.G., (2021). &#8220;A Stress Weighted Ductile Fracture Model for Steel Subjected to Ultra Low Cycle Fatigue,&#8221; Engineering Structures, Elsevier. Volume 245, 112964.<\/li>\n<li>Hassan, A., Torres-Rodas, P., Giulietti, L., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2021). \u201cStrength Characterization of Exposed Column Base Plates Subjected to Axial Force and Biaxial Bending,\u201d Engineering Structures, Elsevier. https:\/\/doi.org\/10.1016\/j.engstruct.2021.112165<\/li>\n<li>Wang, Y.,\u00a0<strong>Kanvinde, A.M.<\/strong>, Li, G., and Wang, Y., (2021). \u201cA new constitutive model for high strength structural steels,\u201d Journal of Constructional Steel Research, https:\/\/doi.org\/10.1016\/j.jcsr.2021.106646<\/li>\n<\/ul>\n<h5>2020<\/h5>\n<ul>\n<li>Song, B., Galasso, C., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2020). \u201cReliability Analysis and Design Considerations for Exposed Column Base Plate Connections Subjected to Flexure and Axial Compression,\u201d Journal of Structural Engineering, American Society of Civil Engineers. 10.1061\/(ASCE)ST.1943-541X.0002903<\/li>\n<li>Xie, Z.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0and Chen, Y., (2020). \u201cA constitutive model for various structural steels considering shared hysteretic behaviors,\u201d Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2020.106421<\/li>\n<li>Inamasu, H.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Lignos, D., (2020). \u201cSeismic Design of Non-Dissipative Embedded Column Base Connections,\u201d Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2020.106417<\/li>\n<li>Zhu, Y., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2020). \u201cEstimating the evolution of strain induced by inelastic cyclic local buckling in steel beam-columns,\u201d Engineering Structures, Elsevier, 215, 110708.<\/li>\n<li>Singh, P.R., Pericoli, V.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Narasimhan, S., (2020). \u201cA framework for analyzing cast iron water main fractures due to moisture induced soil expansion,\u201d Journal of Pipeline Systems, 11(3), American Society of Civil Engineers.<\/li>\n<li>Falborski, T., Hassan, A.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2020). \u201cColumn Base Fixity in Steel Moment Frames: Observations from Instrumented Buildings,\u201d Journal of Constructional Steel Research, Elsevier. https:\/\/doi.org\/10.1016\/j.jcsr.2020.105993<\/li>\n<li>Falborski, T., Torres-Rodas, P., Zareian, F., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2020). \u201cThe effect of base connection strength and ductility on the seismic performance of steel moment resisting frames,\u201d 146(5), Journal of Structural Engineering, American Society of Civil Engineers.<\/li>\n<li>Song, B., Galasso, G., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2020). \u201cAdvancing fracture fragility assessment of pre-Northridge welded column splices,\u201d Earthquake Engineering and Structural Dynamics, 49, 132-154. DOI: 10.1002\/eqe.3228<\/li>\n<li>Kenawy, M., Kunnath, S., Kolwankar, S., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2020). \u201cConcrete Uniaxial Nonlocal Damage-plasticity Model for Simulating the post-peak response of reinforced concrete columns under cyclic loading,\u201d 146(5), Journal of Structural Engineering, American Society of Civil Engineers.<\/li>\n<li>Kolwankar, S.,\u00a0<strong>Kanvinde, A.M.<\/strong>, Kenawy, M., Lignos, D., and Kunnath, S., (2020). \u201cSimulating cyclic local buckling induced softening in steel beam-columns using a nonlocal material model in displacement based fiber elements,\u201d Journal of Structural Engineering, American Society of Civil Engineers, 146(1).<\/li>\n<\/ul>\n<h5>2019<\/h5>\n<ul>\n<li>Inamasu, I.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Lignos, D., (2019). \u201cSeismic Stability of Wide-Flange Steel Columns Interacting with Embedded Column Base Connections,\u201d Journal of Structural Engineering, American Society of Civil Engineers, 145 (12), 04019151.<\/li>\n<li>Zhu, Y.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Pan, Z., (2019). \u201cAnalysis of post-necking behavior in structural steels using a one-dimensional nonlocal approach,\u201d Engineering Structures, Elsevier, 180, 321-331.<\/li>\n<li>Ran, M., Sun, F.,\u00a0Li, G.,\u00a0<strong>Kanvinde, A.M.<\/strong>, Wang, Y., Xiao, R., (2019). \u201cExperimental study on the behavior of mismatched butt welded joints of high strength steel,\u201d Journal of Constructional Steel Research, Elsevier, 153, 196-208.<\/li>\n<\/ul>\n<h5>2018<\/h5>\n<ul>\n<li>Sun, F., Ran, M., Li, G.,\u00a0<strong>Kanvinde, A.M<\/strong>., Wang, Y., Xiao, R.,\u00a0(2018). \u201cStrength model for mismatched butt welded joints of high strength steel,\u201d Journal of Constructional Steel Research, Elsevier, 150, 514-527.<\/li>\n<li>Kenawy, M., Kunnath, S., Kolwankar, S.S., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2018). \u201cFiber-based nonlocal formulation for simulating softening in reinforced concrete beam-columns,\u201d Journal of Structural Engineering, American Society of Civil Engineers, 144(12),\u00a0https:\/\/doi.org\/10.1061\/(ASCE)ST.1943-541X.0002218<\/li>\n<li>Torres-Rodas, P., Zareian, F., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2018), \u201cA hysteretic model for the rotational response of embedded column base connections,\u201d Soil Dynamics and Earthquake Engineering, Elsevier, 115, 55-65.<\/li>\n<li>Kolwankar, S.S.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0Kenawy, M., and Kunnath, S., (2018), \u201cSimulating local buckling-induced softening in steel members using an equivalent nonlocal material model in displacement-based fiber elements,\u201d Journal of Structural Engineering, American Society of Civil Engineers, 144(10),\u00a0https:\/\/doi.org\/10.1061\/(ASCE)ST.1943-541X.0002189<\/li>\n<li>Torres-Rodas, P., Zareian, F., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2018). \u201cSeismic Demands in Column Base Connections of Steel Moment Frames,\u201d Earthquake Spectra, Earthquake Engineering Research Institute.\u00a0https:\/\/doi.org\/10.1193\/062317EQS127M<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, Maranian, P., Joseph, L., and Lubberts, J., (2018).\u00a0\u201cFracture and Fatigue Design of the Wilshire Grand Tower,\u201d Engineering Journal, American Institute of Steel Construction, Vol. 55, pp. 181-189.<\/li>\n<li>Pericoli, V.S., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2018). \u201cTheoretical Study of Ductile Fracture In Steel Structures in The Presence of Spatial Variability in Toughness,\u201d Journal of Structural Engineering, American Society of Civil Engineers.\u00a0144(5): 04018024<\/li>\n<\/ul>\n<h5>2017<\/h5>\n<ul>\n<li>Stillmaker, K., Lao., X., Galasso, C., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2017). \u201cColumn splice fracture effects on the seismic performance of steel moment frames,\u201d Journal of Constructional Steel Research, Elsevier, 137, 93-101.<\/li>\n<li>Kolwankar, S.S.,\u00a0<strong>Kanvinde, A.M<\/strong>., Kenawy, M., and Kunnath, S., (2017). \u201cA uniaxial nonlocal formulation for geometric nonlinearity induced necking and buckling localization in a steel bar,\u201d Journal of Structural Engineering, American Society of Civil Engineers. 143(9): 04017091<\/li>\n<li>Torres Rodas, P., Zareian, F., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2017). \u201cRotational stiffness of deeply embedded column base connections,\u201d Journal of Structural Engineering, American Society of Civil Engineers.\u00a0143(8): 04017064<\/li>\n<li>Grilli, D.A., Jones, R., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2017). \u201cSeismic Performance of Embedded Column Base Connections Subjected to Axial and Lateral Loads,\u201d Journal of Structural Engineering, ASCE.\u00a0143(5): 04017010<\/li>\n<li>Smith, C.M.,<strong>\u00a0Kanvinde, A.M.<\/strong>, and Deierlein, G.G., (2017). \u201cCalibration of continuum cyclic constitutive models for structural steel using Particle Swarm Optimization,\u201d Journal of Engineering Mechanics, ASCE.\u00a0143(5): 04017012.<\/li>\n<li>Smith, C.M.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0and Deierlein, G.G., (2017). \u201cA local criterion for ductile fracture under low-triaxiality axisymmetric stress states,\u201d Engineering Fracture Mechanics, Elsevier, 169, 321-335.<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, (2017). \u201cPredicting fracture in civil engineering steel structures: State of the Art,\u201d Journal of Structural Engineering, ASCE.\u00a0 10.1061\/(ASCE)ST.1943-541X.0001704.<\/li>\n<li>Grilli, D.A., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2017). \u201cEmbedded column base connections subjected to seismic loads: Strength model,\u201d Journal of Constructional Steel Research, Elsevier, 129, 240-249.<\/li>\n<\/ul>\n<h5>2016<\/h5>\n<ul>\n<li>Torres Rodas, P., Zareian, F., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2016). \u201cA hysteretic model for exposed column base connections,\u201d Journal of Structural Engineering, ASCE,\u00a010.1061\/(ASCE)ST.1943-541X.0001602 , 04016137.<\/li>\n<li>Petrone, F., Higgins, P.S., Bissonnette, N.P., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2016). \u201cThe Cross-Aisle Seismic Performance of Storage Rack Base Connections,\u201d Journal of Constructional Steel Research, Elsevier, 122, 520-531.<\/li>\n<li>Grilli, D.A., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2016). \u201cTensile Strength of Embedded Anchor Groups: Tests and Strength Models,\u201d Engineering Journal, American Institute of Steel Construction,\u00a0Second Quarter, 53(2), 87-97.<\/li>\n<li>Stillmaker, K.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0and Galasso, C., (2016). \u201cFracture mechanics based design of column splices with partial joint penetration welds,\u201d Journal of Structural Engineering, ASCE, 140(2),\u00a004015115.<\/li>\n<\/ul>\n<h5>2015<\/h5>\n<ul>\n<li>Cooke, R.J., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2015). \u201cConstitutive Parameter Calibration for Structural Steel: Non-uniqueness and loss of accuracy,\u201d Journal of Constructional Steel Research, Elsevier, 114, 394-404.<\/li>\n<li>Galasso, C., Stillmaker, K., Eltit, C., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2015). \u201cProbabilistic demand and fragility assessment of welded column splices in steel moment frames,\u201d Earthquake Engineering and Structural Dynamics, John Wiley and Sons.\u00a0DOI:\u00a010.1002\/eqe.2557<\/li>\n<li>Shaw, S.M., Stillmaker, K., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2015). \u201cSeismic Response of Partial Joint Penetration Welded Column Splices in Moment Resisting Frames,\u201d Engineering Journal, AISC, 52(2), 87-108.<\/li>\n<\/ul>\n<h5>2014<\/h5>\n<ul>\n<li><strong>Kanvinde, A.M.,<\/strong>\u00a0Higgins, P., Cooke, R.J., Perez, J., and Higgins, J., (2014). \u201cColumn base connections for hollow steel sections: seismic performance and strength models,\u201d Journal of Structural Engineering, ASCE.\u00a010.1061\/(ASCE)ST.1943-541X.0001136.<\/li>\n<li><strong>Kanvinde, A.M<\/strong>., Marshall, K.S., Grilli, D.A., and Bomba, G. (2014). \u201cForensic Analysis of Link Fractures in Eccentrically Braced Frames during the February 2011 Christchurch Earthquake \u2013 Testing and Simulation,\u201d Journal of Structural Engineering, ASCE.\u00a010.1061\/(ASCE)ST.1943-541X.0001043<\/li>\n<li>Myers, A.T.,\u00a0<strong>Kanvinde, A.M<\/strong>.,\u00a0Deierlein, G.G., and Baker, J.W., (2014). \u201cA probabilistic formulation of the cyclic void growth model to predict ultra low cycle fatigue in structural steel,\u201d\u00a0Journal of Engineering Mechanics,\u00a0ASCE.\u00a0<a href=\"http:\/\/ascelibrary.org\/doi\/abs\/10.1061\/%28ASCE%29EM.1943-7889.0000728\">10.1061\/(ASCE)EM.1943-7889.0000728<\/a>\u00a0\u00a0, 04014028.<\/li>\n<\/ul>\n<h5>2013<\/h5>\n<ul>\n<li><strong>Kanvinde, A.M<\/strong>., Jordan, S.J., and Cooke, R.J., (2013). \u201cExposed Column Baseplate Connections in Moment Frames \u2013 Simulations and Behavioral Insights,\u201d Journal of Constructional Steel Research, Elsevier, 84, 82-93.<\/li>\n<li>Zareian, F., and\u00a0<strong>Kanvinde, A.M.<\/strong>,(2013). \u201cEffect of Column Base Flexibility on the Seismic Safety of Steel Moment Resisting Frames,\u201d Earthquake Spectra, Earthquake Engineering Research Institute, 29(4), 1-23.<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, Liu, J.L., Fu, X., and Cooke, R.J., (2013). \u201cFillet weld groups loaded with out of plane eccentricity \u2013 simulations and new model for strength characterization,\u201d Journal of Structural Engineering, ASCE, 139(3), 305-319.<\/li>\n<li><strong>Kanvinde, A.M.,<\/strong>\u00a0and Grilli, D.A., (2013). \u201cSpecial Moment Frame Base Connection: Design Example 8,\u201d 2012 IBC SEAOC Structural\/Seismic Design Manual, Volume 4, Examples for Steel-Frame Buildings, 255-280.<\/li>\n<\/ul>\n<h5>2012<\/h5>\n<ul>\n<li><strong>Kanvinde, A.M.<\/strong>, Grilli, D.A., and Zareian, F. (2012). \u201cRotational Stiffness of Exposed Column Base Connections \u2013 Experiments and Analytical Models,\u201d Journal of Structural Engineering, ASCE, 138(5), 549-560.<\/li>\n<\/ul>\n<h5>2011<\/h5>\n<ul>\n<li>Gomez, I.R.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Deierlein, G.G. (2011). \u201cExperimental investigation of shear transfer in exposed column base connections,\u201d Engineering Journal, American Institute of Steel Construction, 4th Quarter, 246-264.<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, and Deierlein, G.G. (2011). \u201cRecent research on column base connections,\u201d Modern Steel Construction, American Institute of Steel Construction, April 2011, 42-44.<\/li>\n<\/ul>\n<h5>2010<\/h5>\n<ul>\n<li>Shaw, S.M.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Fell, B.V. (2010). \u201cEarthquake-induced net-section fracture in brace connections \u2013 experiments and simulations,\u201d Journal of Constructional Steel Research, Elsevier, 66(12), 1492-1501.<\/li>\n<li>Kwan, Y.K., Gomez, I.R., Grondin, G.Y., and\u00a0<strong>Kanvinde, A.M.<\/strong>\u00a0(2010). \u201cStrength of welded joints under combined shear and out-of-plane bending,\u201d Canadian Journal of Civil Engineering, NRC Press, 37:250-261.<\/li>\n<li>Myers, A.T.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Deierlein, G.G. (2010). \u201cCalibration of the Stress Modified Critical Strain (SMCS) criterion for ductile fracture in steels: specimen size dependence and parameter assessment,\u201d Journal of Engineering Mechanics, ASCE, 136(11), 1401-1410.<\/li>\n<li>Fell, B.V., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2010). \u201cTensile forces for seismic design of braced frame connections \u2013 Experimental Results,\u201d Journal of Constructional Steel Research, Elsevier, 66(4), 496-503.<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>\u00a0(2010). \u201cStructural Steel Design \u2013 Advanced Topics,\u201d in Structural and Geotechnical Engineering, Developed under the Auspices of the UNESCO, EOLSS Publishers, Oxford, United Kingdom [http:\/\/www.eolss.net]<\/li>\n<\/ul>\n<h5>2009<\/h5>\n<ul>\n<li>Fell, B.V. and\u00a0<strong>Kanvinde, A.M<\/strong>. (2009). \u201cSteel Braced Frames \u2013 Enhancing Seismic Response,\u201d The Structural Engineer, Journal of the Institution of Structural Engineers, 87(21), 22-26.<\/li>\n<li><strong>Kanvinde, A.M.<\/strong>, Grondin, G.Y., Gomez, I.R., and Kwan, Y.K., (2009), \u201cExperimental Investigation of Fillet Welded Joints Subjected to Out-of-Plane Eccentric Loads,\u201d Engineering Journal, American Institute of Steel Construction, 46(3), 197-212.<\/li>\n<li>Fell, B.V.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0Deierlein, G.G., and Myers, A.T. (2009), \u201cExperimental Investigation of Inelastic Cyclic Buckling and Fracture of Steel Braces,\u201d Journal of Structural Engineering, ASCE, 135(1), 19-32.<\/li>\n<li>Fell, B.V., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2009), \u201cRecent Fracture and Fatigue Research in Steel Structures,\u201d Structure Magazine, February 2009.<\/li>\n<li><strong>Kanvinde A.M<\/strong>., Gomez I.R., Roberts M., Fell B.V. and Grondin, G.Y, (2009), \u201cStrength and ductility of fillet welds with transverse root notch,\u201d Journal of Constructional Steel Research, Elsevier, 65(4), 948-958.<\/li>\n<li>Myers A.T.,\u00a0<strong>Kanvinde, A.M.<\/strong>, Deierlein, G.G., and Fell, B.V. (2009), \u201cEffect of Weld Details on the Ductility of Steel Column Baseplate Connections,\u201d Journal of Constructional Steel Research, Elsevier, 65(6), 1366-1373.<\/li>\n<\/ul>\n<h5>2008<\/h5>\n<ul>\n<li><strong>Kanvinde A.M.<\/strong>, Fell B.V., Gomez I.R., and Roberts M., (2008), \u201cPredicting fracture in structural fillet welds using traditional and micromechanics-based models,\u201d Engineering Structures, Elsevier, 30(11), 3325-3335.<\/li>\n<li><strong>Kanvinde A.M.<\/strong>, and Deierlein, G.G., (2008), \u201cValidation of Cyclic Void Growth Model for fracture initiation in blunt notch and dogbone steel specimens,\u201d Journal of Structural Engineering, ASCE, 134(9), 1528-1537.<\/li>\n<\/ul>\n<h5>2007<\/h5>\n<ul>\n<li><strong>Kanvinde A.M.,<\/strong>\u00a0and Deierlein, G.G., (2007), \u201cA Cyclic Void Growth Model to assess ductile fracture in structural steels due to ultra low cycle fatigue,\u201d Journal of Engineering Mechanics, ASCE, 133(6), 701-712.<\/li>\n<li><strong>Kanvinde A.M.<\/strong>, and Deierlein G.G., (2007), \u201cFinite Element Simulation of Ductile Fracture in Reduced Section Pull Plates using Micromechanics-based Fracture Models,\u201d Journal of Structural Engineering, ASCE, 133(5), 656-664.<\/li>\n<\/ul>\n<h5>2006<\/h5>\n<ul>\n<li><strong>Kanvinde A.M.<\/strong>, and Deierlein G.G., (2006), \u201cThe Void Growth Model and the Stress Modified Critical Strain Model to Predict Ductile Fracture in Structural Steels\u201d Journal of Structural Engineering, ASCE, 132(12), 1907-1918.<\/li>\n<li><strong>Kanvinde A.M.<\/strong>, and Deierlein, G.G., (2006), \u201cAnalytical Models for the Seismic Performance of Gypsum Drywall Partitions\u201d Earthquake Spectra, EERI, 22(2), 391-411.<\/li>\n<li>Chi, W.M.,\u00a0<strong>Kanvinde, A.M,<\/strong>\u00a0Deierlein, G., (2006), \u201cPrediction of Ductile Fracture In Welded Connections Using the SMCS Criterion,\u201d Journal of Structural Engineering, ASCE, 132(2), 171-181.<\/li>\n<\/ul>\n<h3>Recent Conference Publications (selected)<\/h3>\n<ul>\n<li>Cooke, R.J., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2015). \u201cOverfitting in constitutive model calibration and the effects on fracture prediction,\u201d Engineering Mechanics Institute Conference, ASCE, Stanford, CA, June 2015.<\/li>\n<li><strong>Kanvinde, A.M.,<\/strong>\u00a0(2014). \u201cColumn Base and Splice Details,\u201d North American Steel Construction Conference, American Institute of Steel Construction, Toronto, Canada, March 2014.<\/li>\n<li>Galasso, C., Eltit., C., Stillmaker, K., and\u00a0<strong>Kanvinde, A.M<\/strong>., (2014). \u201cSeismic vulnerability of pre-Northridge column splices in steel moment frames,\u201d Second European Conference on Earthquake Engineering and Seismology, Istanbul, Turkey, 2014.<\/li>\n<li>Grilli, D.A., and\u00a0<strong>Kanvinde, A.M<\/strong>., (2014). \u201cExperimental investigation of the seismic performance of embedded column bases,\u201d 10th US National Conference on Earthquake Engineering, Anchorage, AK, 2014.<\/li>\n<li>Shaw, S.M., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2014). \u201cSeismic performance of partial joint penetration welds in column splices \u2013 NEES Research,\u201d\u00a010th US National Conference on Earthquake Engineering, Anchorage, AK, 2014.<\/li>\n<\/ul>\n<h3>Technical Reports<\/h3>\n<ul>\n<li>Grilli, D.A., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2015). \u201cDesign of Embedded Column Base Connections,\u201d Report 3-11, Submitted to Charles Pankow Foundation, June 2015.<\/li>\n<li>Grilli, D.A., and\u00a0<strong>Kanvinde A.M.,<\/strong>\u00a0(2015). \u201cTensile Capacity of Braced Frame Anchor Bolt Groups,\u201d Report 4-11, Submitted to Charles Pankow Foundation, June 2015.<\/li>\n<li>Pericoli, V.S,\u00a0<strong>Kanvinde, A.M.<\/strong>, Younis, B.A., and Kunnath, S.K., (2014). \u201cForensic analysis of cast iron pipe fractures in the City of Sacramento,\u201d Technical Report submitted to the City of Sacramento, December 2014.<\/li>\n<li>Smith., C.M., Deierlein, G.G., and\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0(2014). \u201cA stress-weighted damage model for ductile fracture initiation in structural steel under cyclic loading and generalized stress states,\u201d Technical Report 187, The John A. Blume Earthquake Engineering Center, Stanford University, 2014-10.<\/li>\n<li>Shaw, S.M.,\u00a0<strong>Kanvinde, A.M.<\/strong>, and Stillmaker, K. (2013). \u201cSeismic Performance of Partial Joint Penetration Welds in Steel Moment Resiting Frames,\u201d\u00a0\u00a0Report Submitted to the American Institute of Steel Construction, Chicago, IL.<\/li>\n<li>Gomez, I.R.,\u00a0<strong>Kanvinde, A.M.<\/strong>,\u00a0and Deierlein, G.G., (2010), \u201cExposed column base connections subjected to axial compression and flexure,\u201d Report Submitted to the American Institute of Steel Construction, Chicago, IL.<\/li>\n<li>Gomez, I.R.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0Smith, C.M., and Deierlein, G.G., (2009), \u201cShear Transfer in Exposed Column Base Plates,\u201d Report Submitted to the American Institute of Steel Construction, Chicago, IL.<\/li>\n<li>Gomez, I.R.,\u00a0<strong>Kanvinde,<\/strong>\u00a0<strong>A.M.<\/strong>,\u00a0Kwan, Y.K., and Grondin, G.Y., (2008), \u201cStrength and Ductility of Fillet Welds Subjected to Out of Plane Bending,\u201d Report Submitted to the American Institute of Steel Construction, Chicago, IL.<\/li>\n<li>Myers, A.T., Deierlein, G.G., and\u00a0<strong>Kanvinde, A.M.<\/strong>, (2009), \u201cTesting and probabilistic simulation of ductile fracture initiation in structural steel components and weldments,\u201d Technical Report 170, John A. Blume Earthquake Engineering Center, Stanford University, CA 94305.<\/li>\n<li><strong>Kanvinde A. M.,<\/strong>\u00a0(2004) \u201cMicromechanical Simulation of Earthquake Induced Fracture in Steel Structures,\u201d Technical Report 145, John A. Blume Earthquake Engineering Center, Stanford University, CA 94305.<\/li>\n<li>Deierlein G.G., and\u00a0<strong>Kanvinde A.M.<\/strong>, (2003). \u201cSeismic Performance of Gypsum Walls \u2013 Analytical Investigation,\u201d Report W-23 CUREE woodframe project.<\/li>\n<li>Fell, B.V.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0and Deierlein, G.G., (2010). \u201cLarge-scale testing and simulation of earthquake induced ultra low cycle fatigue in bracing members subjected to cyclic inelastic buckling,\u201d\u00a0Technical Report 172, John A. Blume Earthquake Engineering Center, Stanford University, CA 94305.<\/li>\n<li>Kunnath, S.K.,\u00a0<strong>Kanvinde, A.M.,<\/strong>\u00a0Xiao, Y., and Zhang, G., (2009). \u201cEffects of buckling and low cycle fatigue on seismic performance of reinforcing bars and mechanical couplers for critical structural members,\u201d A technical report submitted to the California Department of Transportation, under contract 59A0539.<\/li>\n<li>Fell, B.V.,\u00a0<strong>Kanvinde, A.M.,\u00a0<\/strong>Deierlein, G.G., Myers, A.T., and Fu, X., (2006). \u201cBuckling and fracture of concentric braces under inelastic cyclic loading,\u201d\u00a0<a href=\"http:\/\/www.steeltips.org\/steeltips\/tip_details.php?id=94\" target=\"_blank\" rel=\"noopener noreferrer\">SteelTIPS,\u00a0<\/a>Technical Information and Product Service, Structural Steel Educational Council.<\/li>\n<\/ul>\n<p>&nbsp;<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Journal Articles, Books, and Manuals 2026 Dash, S., Belvi, A., Chatterjee, A., and Kanvinde, A.M., (2026 &#8211; in press). &#8220;Internal force distribution in column base connections with an attached brace,&#8221; Journal of Constructional Steel Research, Elsevier. Jhunjhunwala, A., and Kanvinde, A.M., (2026 &#8211; in press). &#8220;Probabilistic Fracture Assessment in Partial-Joint Penetration Welded Pull Plate Experiments [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"inline_featured_image":false,"footnotes":""},"class_list":["post-36","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/pages\/36","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/comments?post=36"}],"version-history":[{"count":94,"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/pages\/36\/revisions"}],"predecessor-version":[{"id":875,"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/pages\/36\/revisions\/875"}],"wp:attachment":[{"href":"https:\/\/faculty.engineering.ucdavis.edu\/kanvinde\/wp-json\/wp\/v2\/media?parent=36"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}