Publications

Student Poster/Presentation Awards

  1. Thomas L’Estrange,  Truong, E., Rymal, C., Rasouli, E., Narayanan, V., Apte, S., and Drost, M. K., Best Student Poster Award at InterPACK/ICNMM 2015 under the category of  Thermal/Fluid Applications and Development for the poster titled:  “High Flux Microscale Solar Thermal Receiver for Supercriticial Carbon Dioxide Cycles”
  2. Thiagarajan, N., Strid, L., Narayanan, V., and Bhavnani, S. H., First Place in Fluid Physics Category, “Gravitational Effects on Bubble Dynamics in Pool Boiling on Asymmetric Surfaces,” 2012 American Society of Gravitational and Space Research (ASGSR) Meeting, November 28-Dec 2nd, 2012, New Orleans, LA.
  3. Mani, P., Cardenas, R., and Narayanan, V., “Submerged Jet Impingement Boiling on a Non-uniformly Heated Polished Silicon Surface,” Interpack2011-52042, ASME 2011 Pacific Rim Technical Conference and Exposition on Packaging and Integration of Electronic and Photonic Systems, Interpack 2011, Portland, OR, July 2011.

Book Chapters/Review Articles

  1. Sushil Bhavnani, Vinod Narayanan, Weilin Qu, Michael Jensen, Satish Kandlikar,Jungho Kim & John Thome (2014) Boiling Augmentation with Micro/Nanostructured Surfaces: Current Status and Research Outlook, Nanoscale and Microscale Thermophysical Engineering, 18:3, 197-222, DOI: 10.1080/15567265.2014.923074
  2. Narayanan, V., Liburdy, J. and Pence, D “Thermal Applications of Microchannel Flows” in Encyclopedia of Aerospace Engineering, eds R. Blockley and W. Shyy, John Wiley: Chichester. DOI: 10.1002/9780470686652.eae613, Published 02nd December 2013.

Archival Journal Articles

  1. Thiagarajan, N., Bhavnani, S. H., and Narayanan, V., 2014, “Self-Propelled Sliding Bubble Motion Induced by Surface Micro-Structure in Pool Boiling of a Dielectric Fluid under Microgravity,” ASME Journal of Electronics Packaging, 137 (2), 021009 (8 pages)
  2. Cardenas, R., and Narayanan, V., 2014, “A Generalized Critical Heat Flux Correlation for Submerged and Free Surface Jet Impingement Boiling,” ASME Journal of Heat Transfer, Vol. 136, 091501-1, 9 pages.
  3. Kapsenberg, F., Strid, L., Thiagarajan, N., Narayanan, V., and Bhavnani, S. H., 2014, “On the Lateral Fluid Motion During Pool Boiling via Preferentially Located Cavities,” Applied Physics Letters, Vol. 104, 154105 (2014); doi: 10.1063/1.4871863.
  4. Ghazvini, M., and Narayanan, V., 2013, “A Microscale Combustor Recuperator and Oil Heat Exchanger- Design and Performance Analysis,” International Journal of Heat and Mass Transfer, 64, pp. 988–1002, http://dx.doi.org/10.1016/j.ijheatmasstransfer.2013.05.032.
  5. Drost, K.J., Eilers, B., Apte, S. V., Narayanan, V., and Schmitt, J., 2012, “Design of a Microchannel Based Solar Receiver/Reactor for Biofuel Processing,” invited paper for special issue, International Journal of Micro-Nano Scale Transport, Vol. 3, No. 1-2, pp. 53-67.
  6. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2012, “Effect of Heater Size and Reynolds Number on the Partitioning of Surface Heat Flux in Subcooled Jet Impingement Boiling,” International Journal of Heat and Mass Transfer, Vol. 59, pp. 247-261.
  7. Cardenas, R., and Narayanan, V., 2012, “Comparison of Deionized Water and FC-72 in Pool and Jet Impingement Boiling Thermal Management,” IEEE Transactions on Components, Packaging and Manufacturing Technology, Vol. 2, No. 11, pp. 1811-1823, http://dx.doi.org/1109/TCPMT.2012.2210717.
  8. Cardenas, R., and Narayanan, V., 2012, “Critical Heat Flux in Submerged Jet Impingement Boiling of Water at Sub-atmospheric Conditions,” ASME Journal of Heat Transfer, Vol. 134, 081502.
  9. Thiagarajan, N., Kapsenberg, F., Narayanan, V., Bhavnani, S. H., and Ellis, C. D., 2012, “Development of a heat sink with periodic asymmetric structures using gray-scale lithography and deep reactive ion etching,” Electron Devices Letters, EDL-2012-03-0571, http://dx.doi.org/1109/LED.2012.2197670, Vol. 33(7).
  10. Cardenas, R., and Narayanan, V., 2012, “Heat Transfer Characteristics of Submerged Jet Impingement Boiling of Saturated FC-72,” International Journal of Heat and Mass Transfer, Vol. 55 (15–16), pp. 4217–4231, http://dx.doi.org/1016/j.ijheatmasstransfer.2012.03.063.
  11. Mani, P., Cardenas, R., and Narayanan, V., 2012, “Comparison of area-averaged and local boiling curves in pool and jet impingement boiling,” International Journal of Multiphase Flow, Vol. 42 (June 2012), pp. 115-127, http://dx.doi.org/1016/j.ijmultiphaseflow.2012.02.002
  12. Cardenas, R., and Narayanan, V., 2012, “Submerged Jet Impingement Boiling of Water Under Sub-atmospheric Conditions,” invited paper for special issue, ASME Journal of Heat Transfer, 020909, Vol. 134, pp. 020909-1-9.
  13. Cardenas, R., and Narayanan, V., 2011, “Heat and mass transfer characteristics of a constrained thin-film ammonia–water bubble absorber,” International Journal of Refrigeration, 34(1), pp. 113-128.
  14. Cardenas, R., and Narayanan, V., 2010, “A Numerical Model for Ammonia-water Absorption into a Constrained Microscale Film,” International Journal of Thermal Science, 49(9), pp. 1787-1798.
  15. Heymann, D., Pence, D., and Narayanan, V., 2010, “Optimization of fractal like branching microchannel heat sinks for single-phase flows,” International Journal of Thermal Science, 49(8), pp. 1383-1393.
  16. Shen, J., Liburdy, J. A., Pence, D. V., and Narayanan, V., 2009, “Droplet Impingement Dynamics: Effect of Surface Temperature During Boiling and non-Boiling Conditions,” invited paper for special issue, Journal of Physics: Condensed Matter, special issue on Dynamics of Wetting, Vol. 21, 464133 (14 pages).
  17. Krebs, D., Narayanan, V., Liburdy, J. A., and Pence, D. V., 2010, “Spatially-resolved Wall Temperature Measurements During Flow Boiling in Microchannels,” invited paper for special issue, Experimental Thermal and Fluid Science, Vol. 34 (4), pp. 434-445.
  18. Kwak, Y., Pence, D. V., Liburdy, J.A., and Narayanan, V., 2009, “Gas-liquid Flows in a Microscale Fractal-like Branching Flow Network,” invited paper for special issue, International Journal of Heat and Fluid Flow, Vol. 30 (5), pp. 868-876.
  19. Narayanan, V., Linke, H., and Taormina, M., 2009, “Visualization of Thermally Actuated Pumping in the Leidenfrost Regime by Surface Asymmetry,” Heat Transfer Photogallery, ASME Journal of Heat Transfer, Vol. 131, p.080904-1
  20. Shen, J., Graber, C., Liburdy, J.A., Pence, D.V., and Narayanan, V., 2009, “Simultaneous droplet Impingement Dynamics and Heat Transfer on Nano-structured Surfaces,” Experimental Thermal and Fluid Science, Vol. 34(4), pp. 496-503.
  21. Jain, K., Wu, C. L., Atre, S. V., Jovanovic, G., Narayanan, V., Kimura, S., and Sprenkle, V., 2009, “Synthesis of Silicon Nitride Nanoparticles in High Temperature Ceramic Microreactors: Design, Fabrication and Testing,” invited paper for special issue, International Journal of Applied Ceramic Technology: Special Issue on Ceramic Microsystems,  6(3), pp. 410-419.
  22. Jenks, J., and Narayanan, V., 2008, “Effect of Channel Geometry Variations on the Performance of a Constrained Microscale-Film Ammonia-Water Bubble Absorber,” ASME Journal of Heat Transfer, Vol. 130, No. 11, 112402.
  23. Narayanan, V., Kanury, A. M., and Jenks, J., 2008, “Heat Exchanger Analysis Modified to Account for a Heat Source,” ASME Journal of Heat Transfer, Vol. 130, No. 12, 124502.
  24. Shen, J., Graber, C., Pence, D. V., Liburdy, J. A., Narayanan, V., 2008, “Simultaneous Droplet Impingement Dynamics and Boiling Heat Transfer,” Heat Transfer Photogallery, ASME Journal of Heat Transfer, Vol. 130, 080902.
  25. Narayanan, V., 2007, “Oscillatory Thermal Structures in a Reattaching Jet Flow,” Journal of Visualization, 10, No. 4, pp. 389-396.
  26. Narayanan, V., and Patil, V. A., 2007, “Oscillatory Thermal Structures Induced by Unconfined Slot Jet Impingement,” Experimental Thermal and Fluid Science Journal, Vol. 32, pp. 682-695.
  27. Cullion, R., Pence, D. V., Liburdy, J. A., and Narayanan, V., 2007, “Void Fraction Variations in a Fractal-like Branching Microchannel Network,” invited paper for special issue, Heat Transfer Engineering, 28(10), pp. 806-816.
  28. Linke, H., Aleman, B., Melling, L., Taormina, M., Francis, M., Dow-Hygelund, C., Narayanan, V., Taylor, R. P., and Stout, A., 2006, “Self-propelled Leidenfrost Droplets”, Physical Review Letters, 96, 154502.
  29. Patil, V. A., and Narayanan, V., 2006, “Spatially Resolved Temperature Measurement in Microchannels,” invited paper for special issue, Microfluidics and Nanofluidics Journal, 2(4), pp. 291-300.
  30. Patil, V. A., and Narayanan, V., 2005, “Spatially Resolved Heat Transfer Rates in an Impinging Circular Microscale Jet,” Microscale Thermophysical Engineering Journal, Vol. 9, pp. 183-197.
  31. Patil, V. A., and Narayanan, V., 2005, “Application of Heated-Thin-Foil Thermography Technique to External Convective Microscale Flows,” Measurement Science and Technology,16, pp. 472-476.
  32. Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., 2004, “Transient Thermal Structure, Turbulence, and Heat Transfer in a Reattaching Slot Jet Flow,” International Journal of Heat and Mass Transfer, 47(24), pp. 5219-5234.
  33. Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., 2004, “An Experimental Study of Fluid Mechanics and Heat Transfer in an Impinging Slot Jet Flow,” International Journal of Heat and Mass Transfer, 47, pp. 1827-1845.
  34. Narayanan, V., Page, R. H., and Seyed-Yagoobi, J., 2003, “A Technique to Visualize Air Flow Using Infrared Thermography,” Experiments in Fluids, Vol. 34, pp. 275 – 284.
  35. Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., 1998, “Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle,” ASME Journal of Heat Transfer, Vol. 120, pp. 348-356.
  36. Seyed-Yagoobi, J., Narayanan, V., and Page, R. H., 1998, “Comparison of Heat Transfer Characteristics of Radial Jet Reattachment Nozzle to In-Line Impinging Jet Nozzle,” ASME Journal of Heat Transfer, Vol. 120, pp. 335-341.
  37. Alam, S. A., Seyed-Yagoobi, J., Narayanan, V., and Page, R. H., 1998, “Drying Characteristics of Slot Jet Reattachment Nozzle and Comparison with a Slot Jet Nozzle,” Drying Technology, Vol. 16, No. 8, pp. 1585-1607.

Papers in Conference Proceedings

  1. L’Estrange, T., Truong, E., Rymal, C., Rasouli, E., Narayanan, V., Apte, S., and Drost, M. K., 2015, “High Flux Microscale Solar Thermal Receiver for Supercritical Carbondioxide Cycles,” paper: InterPACKICNMM2015-48233, Proceedings of the ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems and ASME 2015 12th International Conference on Nanochannels, Microchannels, and Minichannels InterPACKICNMM2015 July 6-9, 2015, San Francisco, California, USA
  2. Pilli, A. K., Abishek, S., Narayanaswamy, R., Jewkes, J., Lucey, A. D., and Narayanan, V., 2014, “Computational Analysis of the Fluid Dynamics and Heat Transfer Characteristics of a Vibrating Heated Plate,” 19th Australian fluid Mechanics Conference, December 8-11, 2014, Melbourne, Australia
  3. Chaugule, V., Narayanaswamy, R., Narayanan, V., Jewkes, J., and Lucey, A. D., 2014, “A Novel Flow Control Valve for Pulsating Flows,” 19th Australian fluid Mechanics Conference, December 8-11, 2014, Melbourne, Australia
  4. Thiagarajan, N., Bhavnani, S. H., Narayanan, V., 2014, “Sliding Bubble-pumped Motion Induced by Surface Microstructure in Boiling in Dielectric Fluids Under Reduced Gravity,” Paper #IMECE2014-37714, Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition, IMECE 2014, Montreal, Canada, November 14-20, 2014.
  5. Natesh, S., Narayanan, V., and Bhavnani, S. H., 2014, “A Numerical Study on Condensation on Asymmetric Microstructures,” IHTC15-9958, Proceedings of the 15th International Heat Transfer Conference, August 10-15 2014, Kyoto, Japan
  6. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2014, “Experimental Study of Pulsed and Steady State Confined Submerged Jet Impingement Boiling of FC-72,” IHTC 15-8439, Proceedings of the 15th International Heat Transfer Conference, August 10-15 2014, Kyoto, Japan
  7. Rasouli, E., and Narayanan, V., 2014, “Single-phase Cryogenic Flows Through Microchannel Heat Sinks,” FEDSM2014-21275, Proceedings of the ASME 2014 4th US-European Fluids Engineering Division Summer Meeting and the 12th International Conference on Nanochannels, Microchannels, and Minichannels, August 3-7 2014, Chicago, IL, USA.
  8. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2014, “Suitability Evaluation of Bubble Departure Diameter and Frequency Models for the Simulation of Subcooled Confined Jet Impingement Boiling,” FEDSM2014-21498, Proceedings of the ASME 2014 4th US-European Fluids Engineering Division Summer Meeting and the 12th International Conference on Nanochannels, Microchannels, and Minichannels, August 3-7 2014, Chicago, IL, USA
  9. Rymal, C. J., Apte, S. V., Narayanan, V., and Drost, K., 2014, “Numerical Design of a Planar High-flux Microchannel Solar Receiver,” ES-FuelCell 2014-6637, Proceedings of the ASME 2014 8th International Conference on Energy Sustainability, Jue 30-July 2, 2014, Boston, MA, USA
  10. Abishek, S., Narayanaswamy, R., Narayanan, V., 2013, “Experimental Study of Low Frequency Pulsating Liquid Jet Impingement Cooling in a Confined Planar Geometry,” accepted, 22nd National and 11th ISHMT-ASME Heat and Mass Transfer Conference, Indian Institute of Technology, Kharagpur, India, December 2013.
  11. Truong, E.D., Rasouli, E., and Narayanan, V., 2013, “Cryogenic Single-phase Heat Transfer in a Microscale Pin Fin Heat Sink,” Paper HT2013-17660 (13 pages), Proceedings of the ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, July 2013.
  12. Ghazvini, M., and Narayanan, V., 2013, “Design of a Microscale Combustor-Heat Exchanger for Low Temperature Applications,” HT2013-17543 (12 pages), Proceedings of the ASME 2013 Summer Heat Transfer Conference, Minneapolis, MN, July 2013.
  13. Rymal, C., Apte, S. V., Narayanan, V., and Drost, K., 2013, “Design of a High- Flux Microchannel Solar Receiver,” ES-FuelCell2013-18353 (9 pages), Proceedings of the ASME 2013 7th International Conference on Energy Sustainability, Minneapolis, MN, July 2013.
  14. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2012, “Effect of Standoff Distance on the Partitioning of Surface Heat Flux During Confined Subcooled Boiling of an Impinging Turbulent Water Jet,” (4 pages), 18th Australian Fluid Mechanics Conference, Launceston, Tasmania, Australia, December 2012.
  15. Mani, P., and Narayanan, V., 2012, “Thermal and Flow Visualization of Submerged Jet Impingement Boiling with FC-72,” HT2012-58384 (12 pages), Proceedings of the ASME 2012 Summer Heat Transfer Conference, Rio Grande, Puerto Rico, USA, July 2012.
  16. Cardenas, R., and Narayanan, V., 2012, “A Correlation for Critical Heat Flux in Submerged Jet Impingement Boiling,” HT2012-58376 (14 pages), Proceedings of the ASME 2012 Summer Heat Transfer Conference, Rio Grande, Puerto Rico, USA, July 2012.
  17. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2012, “Effect of Heater Size on Confined Subcooled Jet Impingement Boiling,” HT2012-58205 (10 pages), Proceedings of the ASME 2012 Summer Heat Transfer Conference, Rio Grande, Puerto Rico, USA, July
  18. Kapsenberg, F., Thiagarajan, N.,  Narayanan, V.,  and Bhavnani, S. H., 2012, “Lateral Motion of Bubbles From Surfaces with Mini-ratchet Topography Modifications During Pool Boiling- Experiments and Preliminary Model,”  Itherm- Paper 3062 (11 pages), San Diego, CA, May 2012.
  19. Drost, K., Apte, S. V., Schmitt, J., and Narayanan, V., 2011,” Design of a Microchannel Based Solar Receiver/Reactor for Biofuel Processing,” ISHMT_USA_018 (7 pages), 21st National and 10th ISHMT-ASME Heat and Mass Transfer conference, Chennai, India, December 2011.
  20. Abishek, S., Narayanaswamy, R., and Narayanan, V., 2011, “Transient Characteristics of confined Submerged Laminar Jet Impingement Heat Transfer from a Vibrating Heater,” (12 pages), 21st National and 10th ISHMT-ASME Heat and Mass Transfer conference, Chennai, India, December 2011.
  21. Haley, D. B., and Narayanan, V., 2011, “Performance Characterization of a Microscale Hydrogen Combustor Recuperator and Oil Heat Exchanger,” IMECE2011-64176 (11 pages), Proceedings of the ASME 2011 IMECE, Denver CO, November 2011.
  22. Thiagarajan, N., Kapsenberg, F., Narayanan, V., Bhavnani, S. H., and Ellis. C., 2011, “On the Lateral Motion of Bubbles Generated from Reentrant Cavities Located on Asymmetrically Structured Surfaces,” Interpack2011-52056, ASME 2011 Pacific Rim Technical Conference and Exposition on Packaging and Integration of Electronic and Photonic Systems, Interpack 2011, Portland, OR, July 2011.
  23. Mani, P., Cardenas, R., and Narayanan, V., 2011, “Submerged Jet Impingement Boiling on a Non-uniformly Heated Polished Silicon Surface,” Interpack2011-52042, ASME 2011 Pacific Rim Technical Conference and Exposition on Packaging and Integration of Electronic and Photonic Systems, Interpack 2011, Portland, OR, July 2011.
  24. Cardenas, R., and Narayanan, V., 2011, “Critical Heat Flux During Submerged Jet Impingement Boiling of Saturated Water at Sub-atmospheric Conditions,” Interpack2011-52043, ASME 2011 Pacific Rim Technical Conference and Exposition on Packaging and Integration of Electronic and Photonic Systems, Interpack 2011, Portland, OR, July 2011.
  25. Cardenas, R., Mani, P., and Narayanan, V., 2011, “Sub-atmospheric Mini-jet Impingement Boiling of Water Under Saturated and Subcooled Conditions,” AJTEC2011-44388, Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, March 2011.
  26. Eilers, B., Narayanan, V., Apte, S., and Schmitt, J., 2011, “Steam-methane Reforming in a Microchannel Under Constant and Variable Axial Surface Temperature Conditions,” AJTEC2011-44390, the Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, March 2011.
  27. Ghazvini, M., and Narayanan, V., 2011, “Performance Characterization of a Microscale Integrated Combustor, Recuperator Oil Heat Exchanger,” AJTEC2011-44633, the Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, March 2011.
  28. Drost, K., Eilers, B., Peterson, D., Apte, S., Narayanan, V., and Schmitt, J., 2011, “Detailed Numerical Modeling of a Microchannel Reactor for Methane-steam Reforming,” AJTEC2011-44664, the Proceedings of the ASME/JSME 2011 8th Thermal Engineering Joint Conference, Honolulu, Hawaii, March 2011.
  29. Cardenas, R., Mani, P., and Narayanan, V., 2010, “Saturated Mini-Jet Impingement Boiling,” FEDSM2010-ICNMM2010, ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, CA, August 2-4, 2010.
  30. Peterson, D., Apte, S., Narayanan, V., and Schmitt, J., 2010, “Design of a Microchannel-Based Receiver and Development of Scalable Catalytic Microchannel Reactors for Biofuels Processing,” ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, CA, August 2010.
  31. Cardenas, R., and Narayanan, V., 2008, “A Numerical Study of Ammonia-water Absorption into a Constrained Microscale Film,” IMECE2008-67021, 2008 IMECE, Boston, MA, November 2008.
  32. Liburdy, J., Pence, D., and Narayanan, V., 2008, “Flow Boiling Characteristics in a Fractal-like Branching Microchannel Network,” IMECE2008-69239, 2008 IMECE, Boston, MA, November 2008.
  33. Krebs, D., Narayanan, V., Liburdy, J., and Pence, D., 2008, “Local Wall Temperature Measurements in Microchannel Flows using Infrared Thermography,” Paper #HT2008-56253, ASME Heat Transfer Summer Conference, Jacksonville, FL, August 2008.
  34. Shen, J., Liburdy, J., Pence, D., and Narayanan, V., 2008, “Single Droplet Impingement: Effect of Nanoparticles, Paper #FEDSM2008-55192, ASME Fluids Engineering Division Summer Conference, Jacksonville, FL, August 2008.
  35. Cardenas, R., Jenks, J., Jo, M-C., and Narayanan, V., 2008, “Performance of a Microscale Film Bubble Absorber Under System Operating Conditions,” ES2008-54125, ASME Energy Sustainability Conference, Jacksonville, FL, August, 2008.
  36. Jo, M-C., and Narayanan, V., 2008, “Thermally-actuated Pumping by Rayleigh-Bernard Convection Using Surface Asymmetry,” FEDSM2008-55118, ASME Fluids Engineering Division Summer Conference, Jacksonville, FL, August, 2008.
  37. Jenks, J., and Narayanan, V., 2008, “Ammonia/Water Bubble Absorption into a Constrained Microscale Liquid Film,” Paper no. HMTC-2008-HMT-15, 19th National and 8th ISHMT-ASME Heat and Mass Transfer Conference, JNTU Hyderabad, India, January 2008.
  38. Kwak, Y., Pence, D., Liburdy, J., and Narayanan, V., 2007, “Liquid and Gas-Phase Velocity Measurements for Two-Phase Flow in a Branching microchannel network,” Paper No. IMECE 2007-41621, Proceedings of the ASME International Mechanical Engineering Congress and Exposition, Seattle, Washington, USA, November 2007.
  39. Jenks, J., and Narayanan, V., 2007, “Effect of Channel Geometry Variations on the Performance of a Microscale Bubble Absorber,” Paper # HT2007-33445, Proceedings of the 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, British Columbia, Canada, July 2007.
  40. Heymann, D., Kwak, Y., Edward, L., Narayanan, V., Liburdy, J., and Pence, D., 2007, “Void Fraction Analysis of Flow Boiling in a Microscale Branching Channel Network,” Paper # HT2007-33517, Proceedings of the 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, British Columbia, Canada July 2007.
  41. Narayanan, V., Kanury, A. M., and Jenks, J., 2007, “Modified Heat Exchanger Analysis Accounting for Heat Generation,” Paper # HT2007-33444, Proceedings of the 2007 ASME-JSME Thermal Engineering Summer Heat Transfer Conference, Vancouver, British Columbia, Canada, July 2007.
  42. J., and Narayanan, V., 2006, “An Experimental Study of Ammonia-Water Bubble Absorption in a Large Aspect Ratio microchannel,” Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, Paper # IMECE2006-14036, Chicago, IL, November 2006.
  43. Narayanan, V., and Patil, V. A., 2006, “Analysis of Temperature Fluctuations Induced by Slot Jet Impingement,” Proceedings of the AIAA/ASME Summer Heat Transfer Conference, Paper # AIAA-2006-3267-305, San Francisco, CA, July 2006.
  44. Patil, V. A., and Narayanan, V.,  2005, “Measurement of Near-Wall Liquid Temperatures in Single Phase Flows Through Silicon Microchannels,” 3rd International Conference on Microchannels and Minichannels (ICMM 2005), Toronto, Ontario, Canada,  June
  45. Narayanan, V., 2003, “Time-resolved thermal flow structures in impinging slot jet flows,” HT2003-47493, Proceedings of the 2003 Summer Heat Transfer Conference, Las Vegas, Nevada, July 2003.
  46. Narayanan, V., 2003, “Temperature measurements and surface visualization in microchannel flows using infrared thermography,” Proceedings of the 1st International Conference on Microchannels and Minichannels, Ed. S. G. Kandlikar, Paper ICMM2003-1117, pp. 879-886, April 2003.
  47. Narayanan, V., Seyed-Yagoobi, J.,  and Page, R. H.,  2001, “Experimental Flow Field and Heat Transfer Study of a Slot Jet Reattachment Nozzle Impinging on a Flat Plate,” 2001 ASME IMECE, New York, NY, November 2001.
  48. Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., 1998, “Representation of Local Heat Transfer Coefficient for Slot and Radial Jet Reattachment Nozzles,” ASME Proceedings of the IMECE, Anaheim, CA, HTD-Vol. 361(1), pp. 229- 236, November 1998.
  49. Alam, S. A., Seyed-Yagoobi, J., Narayanan, V., and Page, R. H., 1998, “Drying Characteristics of Slot Jet Reattachment Nozzles,” Proceedings of the 11th International Drying Symposium, IDS ’98, Halkidiki, Greece, Drying ’98, Vol. A., pp. 565-572, August 1998.
  50. Narayanan, V., Seyed-Yagoobi, J., Page, R. H., and Alam, S. A., 1997, “Effect of Exit Angle on the Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle,” ASME Proceedings of the 32nd National Heat Transfer Conference, Baltimore, MD, 1997, HTD-Vol. 347(9), pp. 119-127, August 1997.
  51. Narayanan, V., Seyed-Yagoobi, J., and Page, R. H., 1996, “Comparison of Heat Transfer Characteristics of a Slot Jet Reattachment Nozzle and a Conventional Slot Jet Nozzle,” ASME Proceedings of the ICEME/WAM, Anaheim, CA,  2, pp. 151- 157, November 1996.
  52. Seyed-Yagoobi, J., Narayanan, V., Page, R. H., and Wirtz, J. W., 1996, “Comparison of Heat Transfer Characteristics of Radial Jet Reattachment Nozzle to In-Line Impinging Jet Nozzle,” ASME Proceedings of the 31st National Heat Transfer Conference, Houston, TX, HTD-Vol. 324, pp. 85-92, August 1996.

Other Conference Publications

  1. Wilson, A., and Narayanan, V., 2015, “Enhanced Jet Impingement Boiling Using Self-sustained High-frequency Flow Oscillations,” paper presented at the 8thInternational Boiling and Condensation Conference, Boulder Colorado, April 2015
  2. Natesh, S., Narayanan, V., and Bhavnani, S. H., 2014, “A Combined Experimental and Numerical Study of Condensation on Asymmetric Microstructures,” 9th Int. Conference on Two-Phase Systems for Ground and Space Applications to be held Sept. 22-26, 2014 in Baltimore Maryland, extended abstract.
  3. Cardenas, R., Mani, P., Narayanan, V., Dokken, C., 2012, “On the elimination of temperature overshoot during jet impingement boiling of highly wetting fluids,” Paper 1466 (9 pages), ECI 8th International Conference on Boiling and Condensation Heat Transfer, Ecole Polytechnique Federale de Lausanne, Switzerland, June 2012.
  4. Lightfoot, M. D. A., Narayanan, V., Kastengren, A., Schumaker, A., and Danczyk, S. A., 2012, “ Development of Non-uniformities in Swirling Rocket Injectors,” (12 pages), ILASS Americas, 24th Annual Conference on Liquid Atomization and Spray Systems, San Antonio, TX, May 2012; also report A264175, http://www.stormingmedia.us/26/2641/A264175.html
  5. Lightfoot, M. D. A., Narayanan, V., Schumaker, S. A., Danczyk, S. A., and Eilers, B., 2011, “Injector-wall Interactions in Gas-centered Swirl Coaxial Injectors,” JANNAF 8th Modeling and Simulation / 6th Liquid Propulsion / 5th Spacecraft Propulsion Joint Subcommittee Meeting, Huntsville, AL, December 2011.
  6. Lightfoot, M. D. A., Danczyk, S. A., Eilers, B., Narayanan, V., Schumaker, S. A., 2011, “The Impact of a Single Wall on the Stability of the Spray Produced by a Gas-centered Swirl Coaxial Injector,” ILASS Americas, 23rd Annual Conference on Liquid Atomization and Spray Systems, Ventura, CA, May 2011.
  7. Narayanan, V., Lightfoot, M. D. A., Schumaker, S. A., Danczyk, S. A., and Eilers, B., 2011, “Use of Proper Orthogonal Decomposition Towards Time-resolved Image Analysis of Sprays,” ILASS Americas, 23rd Annual Conference on Liquid Atomization and Spray Systems, Ventura, CA, May 2011.
  8. Kwak, Y., Pence, D., Liburdy, J., and Narayanan, V., 2008, “Gas-Liquid Flows in Fractal-Like Branching Flow Networks,” Engineering Conference International Heat Transfer and Fluid Flow in Microscale III, Whistler, BC, Canada, September 2008.
  9. Heymann, D., Enfield, K., Pence, D., and Narayanan, V., 2008, “Gradient-Based Optimization of Single-Phase Microscale Fractal-like Branching Channel Heat Sinks,” Engineering Conference International Heat Transfer and Fluid Flow in Microscale III, Whistler, BC, Canada, September 2008.
  10. Graber, C., Shen, J., Liburdy, J., Narayanan, V., and Pence, D., 2008, “Simultaneous Droplet Impingement Dynamics and Heat Transfer using Nanofluids and Nanostructures,” Engineering Conference International Heat Transfer and Fluid Flow in Microscale III, Whistler, BC, Canada, September
  11. Krebs, D., Narayanan, V., Pence, D., and Liburdy, J., 2008, “Transient Surface Temperature Measurements during Flow Boiling in Microchannels,” Engineering Conference International Heat Transfer and Fluid Flow in Microscale III, Whistler, BC, Canada, September 2008.
  12. Atre, S. V., Jain, K., Wu, C., Kimura, S., Sprenkle, V., Jovanovic, G., and Narayanan, V., 2007, “Synthesis of Nanoparticles in High Temperature Ceramic Microreactors: Design, Fabrication and Testing,” Proceedings of Acers/IMAPS 3rd International Conference and Exhibition of Ceramic Interconnect and Ceramic Microsystems Technology, April 2007.
  13. Jain, K., Wu, C., Atre, S., Kimura, S., Sprenkle, V., Jovanovic, G., and Narayanan, V., 2007, “Design, Fabrication, and Testing of a Ceramic Microreactor for Nanoparticle Synthesis,” Nano Science and Technology institute (NSTI) Bio Nano 2007 Conference, Santa Clara, California, May 2007.
  14. Cullion, R., Pence, D. V., Liburdy, J. A., and Narayanan, V., 2006, “Void Fraction Variations in a Fractal-like Branching Microchannel Network,” ECI International Conference on Boiling Heat Transfer, Spoleto, Italy, May 2006.
  15. Tobias, J., and Narayanan, V., 2006, “Characterization of the Near-field Flow Structure of an Acoustically Self-Excited Jet Using PIV,” 12th International Symposium on Flow Visualization, Paper # 92, German Aerospace Center, Gottingen, Germany, September 2006.
  16. Narayanan, V., and Page, R. H., 2006, “Analysis of Surface Temperature Fluctuations in Reattaching Slot Jets,” 12th International Symposium on Flow Visualization, Paper # 100, German Aerospace Center, Gottingen, Germany, September 2006.
  17. Narayanan, V., and Patil, V. A., 2005 “Temperature Measurement In Internal Microscale Flows Using Infrared Thermography,” ECI Conference on Heat Transfer and Fluid Flow in Microscale, Castelvecchio Pascoli, Barga, Lucca, Italy, September 2005.
  18. Enfield, K., Pence, D. V., and Narayanan, V., 2005, “ Optimization of Single Phase Microscale Fractal-Like Branching Flow Heat Sinks,” ECI Conference on Heat Transfer and Fluid Flow in Microscale, Castelvecchio Pascoli, Barga, Lucca, Italy, September 2005.
  19. Narayanan, V., Seyed-Yagoobi, J.,  and Page, R. H., 2002, “Combined Fluid Mechanics and Heat Transfer Measurements in Normally Impinging Slot Jet Flows,” Proceedings of the 5th International Symposium on Engineering Turbulence Modelling and Experiments – 5, W. Rodi and N. Fueyo, Eds., Mallorca, Spain, pp. 495-504, September 2002.

Comments are closed.